2DOF Project

Ok, i am finished. My 2dof performs perfect (for me) in LFS. For now i have Surge + Sway on 100 %
and Heave on 50 %.

I had to reverse Axis1a. Now in LFS breaking goes up and speed goes down.
Also vibration on curbs. But just a little bit.

As soon as my seat is here i will put in on and then i think i will make some fine tuning on it.

Great. This Forum and his members are great! Realy.

I am very gratefull for all the help i get here.

BTW - If anything is realy finished and working i am going to make a 3rd axis for drift.

Will try another wiper motor and put a T16 Rod with basement on it. Maybe it is fast enough
to give drift feeling.

I made a video but i have no Youtube channel to upload....not yet But i will and paste
Link in here.

For now this is my nearly finished Sim! Tommorow i will do the rest work on it.

Ok, i have now put all to this



seems to work fine.

Should i also post my 3d printed parts in here or in the 3d print section?

The parts regarding to this sim build. So i am not sure where to put them.

greets

Yes, will get my Seat end of the week, i will mount it and make a Video of the whole Seat with the simrig.

I will also add pictures of the finished rig and the STL files of the POT mounts for interessted people.

Sorry had a lot to do @work and @home atm.

greets
Özden

Hi Noorbeast

yes i did have finished my Seat. But i have a couple of problems to solve.

First of all my motors seems to have not enough power and the second issue is that i am
thinking that the middle point of the weight of my construction is wrong.

I am falling to the front if i sit on the seat. But if i am putting it to far back the motors
do not have enough torque to hold.

BUT! I am actually building an actuator for testing purposes. I am leaning on the conception
of the SFX Plattform. But i try to make it as a cheaper version for everyone.

I am still testing on 100x100 aluminum profile but i will go down to 80x80 to reduce cost.

As i have plenty of work i do not have the time to focus on this. But i will find a solution.

I am using a regular Nema 23 with 3.0 nm. I know that this would not able to hold large
weights, but it is just for testing its function. If it works i will try 34 or higher nema stepper.
Position Feedback will be given over a 100mm fader. Maybe it will work.

Right now i am waiting for couplers coming from china. Cost per coupler 3.50 Euro from China
from Germany 25 Euro. So i decided to wait

But now wait a few mins. Pictures from my seat are coming.

Greets
Özden

Here are my pics