Homemade 3DOF simulator the beginning of the project

I have been preparing to start building this project for a long time. At the beginning, I installed the Microsoft Flight Simulator 2020 and learned how to fly a plane a little, I realized that I needed a more natural immersion in the reality of flight. After studying the work of other people, I realized that you can try your hand. First I bought 3 motors from car wipers, installed them on metal plates. I connected the feedback resistors to the motors using gears made on a 3D printer.

I want to supply power supplies from the server 12 volts 850 W

Now I'm building an arduino and motor control drivers

Assembled the scheme

nstalled additional cooling radiators. It is necessary to put an insulator gasket between the radiator and the board,

I set up the electronics according to the video lesson Thanks to the author for a detailed story!

Making a platform from materials I found in the garage

Profile pipe. It was heavy, but I had it

A seat from a Japanese car

It remains to be treated from rust and painted

partial installation

Assembled the mechanical part. I assume that the motors will need to be installed at the back of the chair because there the lever relative to the hinge is longer and it will be easier for them to move. but first I'll try in this version

Hi, it looks like you are giving birth to a nice rig.
I'm currently designing mine, I am interested in following your build.
Have you already decided what software will connect the game to the motors?

Hello, software SimTools + arduino+ BT-2

Today I tested the installation. As expected, the motors turned out to be very weak, they worked only at peak modes, fine motor skills were not felt (((. I will put 250W 24V from the kalyaski

Hi radist07, thanks for the reply.
I ordered two wheelchair motors 250W 24V 75rpm from China
I googled kalyaski but couldn't find anything related to motors, is that a shop?

https://aliexpress.ru/item/32823078...669742296-1449041126.1669742042&sku_id=260926

Thanks,
here it shows as Aliexpress.
I bought the same motors from Alibaba.

ood afternoon, everyone. I assembled the installation and made a trial run. So far, everything is not working very correctly. I will work with the settings.
https://youtube.com/shorts/aHdgDt1XY0Q?feature=share