FlyPT Mover 3.7.0.9

Feedback: On the Pose page the manual sliders for input should not have their range defined by the output range of the motion. Case in point: I'd like to have the ability to put in 50-100 degrees/s yaw rate but I want to limit my yaw output to 10 degrees. Right now you can't do it, you have to set the limit/range to 100 and use a logistic in the filter to limit it. Note that this realistically only impact testing with the sliders, real input can be whatever it wants to be, but it would be nice to have the ability to control the input range for the slider separate from the output range limit.

While I don't have a FFB stick and therefore no dog in this fight, I have to concur that mover does not really add much here.

Bug:


Add Direct, click Actuator test slider.

Weird Bug: if I name my Rig "MXP" I can't get it to use its value in the serial output. If I name it "MXP1" same problem. If I name it "RMXP" it works and I can reference it.

I migrated my racing profile to 3.7 and it seems to work with the above issues. There are a few more but let's address them one by one.

However a really weird one is this:
If I start Mover and then start iRacing, I lose sound in iRacing for the engine/tires/etc. My spotter still talks to me but all other sounds are just dead.

If I start iRacing without Mover, audio is fine. As soon as I start Mover, audio stops playing in iRacing and I can't hear a thing. Obviously this is a deal breaker immediately.

Let me know when there is a fix for this and I'll give it a go.

Also, the scaling on my ultrawide 4K (Odyssey 9) is set to 125% and I experience the weird sizing and resizing issues. This is on my sim rig with a single monitor which is a double 4k essentially.

This problem likely could be only impacting 4k monitors so unless you have one you won't be able to repro.

Yes, i noticed this one, try to launch mover with:

Mover.exe NoAudioDevices

Seems iRacing is using audio in exclusive mode, unless... I have an idea of what might be the problem

Yes, I've seen you as a contributor to development. Thank you very much for your efforts !

"For DCS and ILS, the in-game FFB is used directly, and additional events are added on it."

So that's why a custom curve for spring speed/force can't be user-defined for Il2 and DCS? Will it stay that way? The advice I received to solve my problem was to remap the spring coefficients globally in the device, which makes me think we don't really understand each other.

"Please keep these completely separate!"

I understand and I wouldn't be asking for help here if such an essencial feature (IMHO) wouldn't be missing in TelemFFB.

"I was the one who made the recent UI in TelemFFB, i dont think its a good idea to route it thru mover."

I wasn't necessarily thinking of linking TelemFFB to Mover, but Mover as an independent solution for FFB devices (Also Walmis board) where the user would have complete control over the filtering and math on each effect.

@hexpod and @Aerosmith ,

What we can do is not a hid ffb, but a simple hid joystick (as windows/games see it) with motors feed by Mover.
Mover can also receive the joystick info and deal with calculating the FFB and adding effects dependent on vars.
Not sure I'm explaining exactlly what I mean.

This is something I thought of doing for active pedals and ffb gearbox on cars.
I even though of changing pedals position depending on cars. Gearbox would have two motors, one simulating engine rpm and another gearbox rpm, all connected to a clutch... So it's not a hid ffb if you understand.

In a plane yoke, you could do springs and adjust as desired.

Wow...
What I see is that when you change the key, The key in the output is not updated... It's visually, but not in the calculation showing a blank output.
Changing the key in the string or dragging another key, updates it correctlly.
When possible, can you confirm this please.

Also, some confusion can come from name and key. Name is just what shows in the window while key is the important one.

EDIT: OK After some more testing, it's worst than I thought.... Looking for the bug right now

You said two motors car shifter ? :

https://m.youtube.com/shorts/yfft-NoujPw

REALLY jealous as I can't get past this error. Is it only me? I've uninstalled/re-installed creative/realtek drivers/ .net 8 and used the .net repair tool. What have I missed?:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: length ('-1') must be a non-negative value. (Parameter 'length')
Actual value was -1.
at System.ArgumentOutOfRangeException.ThrowNegative[T](T value, String paramName)
at System.ArgumentOutOfRangeException.ThrowIfNegative[T](T value, String paramName)
at System.String.ThrowSubstringArgumentOutOfRange(Int32 startIndex, Int32 length)
at System.String.Substring(Int32 startIndex, Int32 length)
at Mover.Devices.Serials.UpdateDevices() in C:\Users\pedro\source\repos\Mover3\App\Devices\Serials.cs:line 78
at Mover.Main.Main.Main_Load(Object sender, EventArgs e) in C:\Users\pedro\source\repos\Mover3\App\Main\Main.cs:line 94
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at Mover.UI.Window.OnLoad(EventArgs e) in C:\Users\pedro\source\repos\Mover3\App\UI\Window.cs:line 132
at System.Windows.Forms.Control.CreateControl(Boolean ignoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at Mover.UI.Window.WndProc(Message& m) in C:\Users\pedro\source\repos\Mover3\App\UI\Window.cs:line 254
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(HWND hWnd, MessageId msg, WPARAM wparam, LPARAM lparam)


************** Loaded Assemblies **************
System.Private.CoreLib
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Private.CoreLib.dll
----------------------------------------
Mover
Assembly Version: 3.7.0.1
Location:
----------------------------------------
System.Runtime
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Runtime.dll
----------------------------------------
System.Drawing.Primitives
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Drawing.Primitives.dll
----------------------------------------
System.ComponentModel.EventBasedAsync
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.ComponentModel.EventBasedAsync.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\System.Windows.Forms.dll
----------------------------------------
System.Windows.Forms.Primitives
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\System.Windows.Forms.Primitives.dll
----------------------------------------
System.Runtime.InteropServices
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Runtime.InteropServices.dll
----------------------------------------
System.Threading
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Threading.dll
----------------------------------------
System.Diagnostics.TraceSource
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Diagnostics.TraceSource.dll
----------------------------------------
System.Collections
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Collections.dll
----------------------------------------
System.ComponentModel.Primitives
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.ComponentModel.Primitives.dll
----------------------------------------
System.Drawing.Common
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\System.Drawing.Common.dll
----------------------------------------
System.Collections.Specialized
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Collections.Specialized.dll
----------------------------------------
System.ComponentModel.TypeConverter
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.ComponentModel.TypeConverter.dll
----------------------------------------
Microsoft.Win32.Primitives
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\Microsoft.Win32.Primitives.dll
----------------------------------------
System.Threading.Thread
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Threading.Thread.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\Accessibility.dll
----------------------------------------
System.Resources.Extensions
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\System.Resources.Extensions.dll
----------------------------------------
System.Memory
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Memory.dll
----------------------------------------
System.Drawing
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\System.Drawing.dll
----------------------------------------
Microsoft.Win32.SystemEvents
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\Microsoft.Win32.SystemEvents.dll
----------------------------------------
System.Numerics.Vectors
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Numerics.Vectors.dll
----------------------------------------
System.ComponentModel
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.ComponentModel.dll
----------------------------------------
System.Collections.Concurrent
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Collections.Concurrent.dll
----------------------------------------
System.Runtime.Loader
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Runtime.Loader.dll
----------------------------------------
System.Linq
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Linq.dll
----------------------------------------
Microsoft.Win32.Registry
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\Microsoft.Win32.Registry.dll
----------------------------------------
System.ObjectModel
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.ObjectModel.dll
----------------------------------------
System.Diagnostics.Process
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Diagnostics.Process.dll
----------------------------------------
System.Collections.NonGeneric
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Collections.NonGeneric.dll
----------------------------------------
Microsoft.Windows.SDK.NET
Assembly Version: 10.0.17763.24
Location:
----------------------------------------
WinRT.Runtime
Assembly Version: 2.0.0.0
Location:
----------------------------------------
System.Runtime.CompilerServices.Unsafe
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Runtime.CompilerServices.Unsafe.dll
----------------------------------------
System.Security.Cryptography.Algorithms
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Security.Cryptography.Algorithms.dll
----------------------------------------
System.Security.Cryptography
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Security.Cryptography.dll
----------------------------------------
System.Private.Uri
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Private.Uri.dll
----------------------------------------
System.Linq.Expressions
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Linq.Expressions.dll
----------------------------------------
System.Reflection.Emit
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Reflection.Emit.dll
----------------------------------------
Snippets
Assembly Version: 0.0.0.0
Location:
----------------------------------------
System.DoubleNumerics
Assembly Version: 1.0.0.0
Location:
----------------------------------------
System.Configuration.ConfigurationManager
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App\8.0.8\System.Configuration.ConfigurationManager.dll
----------------------------------------
System.Text.RegularExpressions
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Text.RegularExpressions.dll
----------------------------------------
System.Resources.Writer
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Resources.Writer.dll
----------------------------------------
System.Runtime.Serialization.Formatters
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Runtime.Serialization.Formatters.dll
----------------------------------------
System.Xml.XDocument
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Xml.XDocument.dll
----------------------------------------
System.Private.Xml.Linq
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Private.Xml.Linq.dll
----------------------------------------
System.Private.Xml
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Private.Xml.dll
----------------------------------------
System.Security.AccessControl
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Security.AccessControl.dll
----------------------------------------
System.Security.Principal.Windows
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Security.Principal.Windows.dll
----------------------------------------
System.Runtime.Numerics
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Runtime.Numerics.dll
----------------------------------------
System.Net.Primitives
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Net.Primitives.dll
----------------------------------------
System.Formats.Asn1
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Formats.Asn1.dll
----------------------------------------
System.Reflection.Emit.ILGeneration
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Reflection.Emit.ILGeneration.dll
----------------------------------------
System.Reflection.Primitives
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Reflection.Primitives.dll
----------------------------------------
System.Reflection.Metadata
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Reflection.Metadata.dll
----------------------------------------
System.Xml.ReaderWriter
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Xml.ReaderWriter.dll
----------------------------------------
System.Security.Claims
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Security.Claims.dll
----------------------------------------
System.Collections.Immutable
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Collections.Immutable.dll
----------------------------------------
System.IO.Ports
Assembly Version: 8.0.0.0
Location:
----------------------------------------
System.Diagnostics.StackTrace
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Diagnostics.StackTrace.dll
----------------------------------------
System.IO.Compression
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.IO.Compression.dll
----------------------------------------
System.Text.Encoding.Extensions
Assembly Version: 8.0.0.0
Location: C:\Program Files\dotnet\shared\Microsoft.NETCore.App\8.0.8\System.Text.Encoding.Extensions.dll
----------------------------------------

************** JIT Debugging **************

Please, try running Mover with this command line:

Mover.exe NoAudioDevices

Also try to disconnect serial devices... sorry

Yes, kind of that. But I thought of simulating the drive axis with two motors. Almost a real gearbox.

It looks like regular Rhino FFB Joystick base with two motors and something like 6:1 belt reduction.

Edit: I imagine you can easily simulate the resistance spots to match pretty well the resistance of a real car gearbox

I think the Moza FFB joystick base is planned to have this kind of functionality.

Ok, we are going to have a new build tomorrow.

-I made some changes to vars. Mainly joysticks and midis.
We can now assign a control to a var by detecting it.
The changes solved the problems described by @GTakacs

-Also solved the bug in direct actuators

-Hope I get VTOLVR working tomorrow

-Also working on a solution for GT games

-Looking at iRacing audio problem...

-Working in Thanos card also, not sure it will be ready.

Awesome! Thanks! I'll do some more testing tonight of the current build but looking forward to the new and improved one.

Hi Pedro!
I did some first adaptations and tests with Mover 3.7 on my 6DOF Odrive-Rig.

I modified the "old" output-string to the new one: "p 0 <R0.A2.T> <13>p 1 <R0.A3.T> <13>" (here for the actuators 2 and 3).
I used the motor turns T for my Odrive, because the official Odrive firmware expects the positon in turns (thanks for this feature !!!!)
So far so good.
After some try and error with some settings, the actuators moved to the expected start positon - WOW
But as you can see here in this short video :
it seems that my rig gets only the full turns (integers) and not the decimals (floating) ??
In the serial-output-window I was only able to switch between "binary" and "ASCII" but I was not able to choose "decimal" like in the "old" mover. Maybe this could be the reason?

HAve

Try using <<R0.A1.T> instead of <R0.A1.T>. That should set the output to a double (float)