FlyPT Mover 3.7.0.9

Thanks for the quick reply. I will try and let you know. Meanwhile if you come up with a solution let me know. Cheeeeeers!

One step after the other, and at the end of the day we can measure the distance traveled, not before....

Good luck, you always have our full support!

Happy New Year and best wishes to you and your family!

Have you been able to make the simtools plugin for flypt yet for simtools v3 that is?

I've tried to understand the new strings:
[A<R0.A1.B>]
Please Axis 1, send your data to Rig 0, Actuator 1
it works.
[C<R0.A3.B>]
Please Axis 3, send your data to Rig 0, Actuator 3
Does not work.
I have a 3 actuators rig, 1 and 3 are up front. If I switch the COM PORT, the other actuator start to move. I see the data changing on both output and they have the connection arrow in mover main window.
Is it a bug or am I missing something?

Try [A<R0.A3.B>] or [B<R0.A3.B>]

How many controllers are you using? And what controller?
Because for a 3DOF rig using one SMC controller you need:

[A<R0.A1.B>][B<Ro.A2.B>][C<Ro.A3.B>]

If you are using two controllers, one for each side, connected in different ports, are you sure one is #1 and the other #3? They might be both number 1 and for that you need two outputs, one for each usb port:

[A<R0.A1.B>]
[A<R0.A3.B>]

But this would be strange...

More info here: https://www.xsimulator.net/community/threads/flypt-mover-3-7-0-9.19016/page-21#post-251484

Ok, I got it.
[A<R0.A1.B>] Front Right (com3 for me)
[A<R0.A2.B>] Back (com4 for me)
[A<R0.A3.B>] Front Left (com 5 for me)

I use 3 arduino with 3 Sabertooth and each motor is connected to output A of each Sabertooth.

Thanks for all the help.
Pierre.

Soon:

Some directions seem wrong...

Data seems to have a good resolution (frequency);