iracing bassshaker profil

hi,
i have make a new bassshaker profil for iracing.ihave make it with the star mazda.
but you can use it with all cars.with shift effect engine rounds effekt curbs,drift,brake and bumbs effects.i love the feeling with drift on bassshakes.
comments wantet.

hi,
i have work any houers again for a good profil and i find any new effects
and the old effects i have make better.you mast have in the sender on axis z the position from your brake is in profiler number 43 you must have it from
0 to 117 not from -117 to 117.than i have a very realistic feeling on brake
and on still tires on brake.very nice feeling on drift,you can feel were are the tires rubber on curve.nice shift feeling very nice shift down on brake.
a littel curbs and bumps feeling.but i work in the next time again imean i can
make any thinks better but in the moment i very happy with the result.
the new profil is in the first posting the name is iracing bassshaker 3

Hello everyone.
I have connected a bass shaker to my soundcard but profiler
does not see it.
What are the steps to recognize the soundcard as output
Thanks for your help

hi you must open the bassshaker plugin in interface settings.
than set your soundcard in the plugin. than you mast restart the profiler
and than the profiler find your soundcard.

Many thanks for your quick response, sorry to my knowledge very low so if my questions seem silly and because of my incompetence.
My aura bass shaker is connected to an ampli connected to the internal sound card of my pc.
When i open the profiler i can't see no output or interface and i dont know how to configure a port
for recognize the soundcard as an output
Thank for your patience

hi,you can not use the same soundcard were are make the playsound.you mast have a second soundcard or a second pc.
sirnoname have wride:
Connect your bass shaker to your soundcard and control its frequency and volume with the ingame RPM or Speed value. (or whatever you like)
Attached you find a sample setup for the test plugin to get a feeling for it.
For setup you have to open the plugin dialog and select a soundcard where the frequency has to be sent to.
Fill the dialog with your wished minimum and maximum frequency. (sine output!)
Press the HW rescan button, insure the plugin output is listed in the interface setup of the profiler.

Hi i'm here again
In my pc there are no room for another sound card so i have buy a really cheap USB sound card key
After connected everythings working fine but when i try to charge the profile on profiler it doesent
recognize the sound card on usb so i can't find no output for bass shaker volume or frequency.
It 's x-sim that doesent work with USB sound card or some other thing that i dont understand.
Sorry again for my silly question but i have 6 bass shaker and i wish to drive 1 at least with x-sim

Thank in advance for your help

Is your sound card properly registering with Windows, and is is Direct Sound? If you go to Control Panel-->Sound and see if your new sound card is listed.

Yes is listed as speaker USB AUDIO and if i connect another one is listed as USB AUDIO 2
I use win7
By the way if i connect some real speaker or bass shaker on it and configure it as predefined i can hear
music or vibration so it works for windows but i dont know how to make it visible for profiler

I do it everytime but nothing appens
If i try to use the servo commander for example and send the signal to the soundcard this setup see all the soundcard and i can fell the vibration on the bass shaker in the profiler i can't see no output

i use the last version of x-sim
After your precious suggestion i have cleared and reinstalled x-sim
Things don't work but i have noticed that if i leave only the bass shaker plugin when i start the profiler
it dos'nt recognise no output.
If i try to open setting with the button (in the interface setting page) when the bass shaker plugin is marked notthing happens , the same if i try an hw rescan but if i uncheck the bass shaker plugin and i try to open setting with the button befor the automatic rescan i can see the pop up page of sound card setting and just for a while i can see all the sound card.
But after a second the profiler crash and i can't choose the right one
Is certanly something related about my low knowledge but i try that in another pc ( the first one is a quad core with win7 64 bit the second one is a quad core with xp pro 64 bit) and is the same.

Nima,

Thanks for posting this. A lot of work goes into making these profiles!

Maybe due to differences in car and real world hardware the profile didn't bring out the curbs as I'd like. From iracing, what telemetry data was used to create vibration over curbs? I was playing around with z force but want to make sure that is it.

Thanks again,

John

OK...I just ran across the how to mak profiles thread. Looks like people are using a combination of inputs to create effects like vibration over curbs. Too bad the sim doesn't push that data out as I think it is a strethc to try and mimic it from Z force, Z pos and roll.

I see that when load v3 of profile lines 11 and 17 for Bass Shaker Frequency come up
as 'error'. Also, in input screen RX, RY, and RZ are populated but not X, Y and Z. Could explain why I am not getting any effect over bumps and rumble strips? The effect working seems to be one based on RPM.

I have just tried Nima's Profile for the Buttkicker and I have some problems.

The BassShaker appears to be doing all that is intended however my motion profiles seemed to be effected somewhat. My motion seems slowed down and unresponsive like it is suffering serious lag? Im getting no gear change response or effects when I drive off tracks?? Its as though the actuators are in slow motion and only outputing 20% of there normal duties.

Its as though the BassShaker Profile is dominating my motion profiles, for example, I can feel my actuators performing tiny movements like they are mimicking my Buttkicker when the car is idle.

I went into the Interface settings and dissabled the BassShaker, removed all of its content. Ive even deleted the profile from my profiles folder and the motion is the same?

Any ideas whats happened?

Hello everybody,

There seem a lot of questions concerning the use of a bass shaker in Xsim. Frank from ricmotech (where I bought plans to build a racing-rig) was so kind to give some information that is included in the pdf below. Take a look and hopefully it is helpfull.

For any who is interested in the plans you can find them here:

http://www.ricmotech.com/store/diy_sim_ ... _home-made

Greetings,
Bart

is there a profile for DIRT2 or Dirt3?
I would try to understand how you can put effects .... 25/26/27