Best/Most powerful actuators ?

Hi everyone,

For my project, im exploring actuators possibilities for large motion, but maybie i dont know or search very well.
I know the diy MotionXP, Departed Reality, with long course. 500mm is around what im looking for.
But do you know any industrial or other strong actuators references with high speed and long course that could be use for motion sim ?
Regards. Arth.

For a top brand industrial actuators you could google with festo eppc
regards Ad

must be festo epcc there low cost serie stroke max 500mm and speed 600mm/sec max. There biggest build for 60 and 80st motors

I found a kit of linear actuators that are very similar to the MotionXP in Aliexpress. The kit of 6 actuator (motor+servo controller+linear things) with all the bolts, screws and supports for ~3000€

The brand is Vn-Motion but I don't find more info about that brand anywhere.

Check it: https://es.aliexpress.com/item/1005...rl=scene:search|query_from:#nav-specification

what is the speed in mm / sec and length of actuation ?

if you look at his partlist he gives a 500mm 1610 ballscrew and a 3000rpm motor so speed 500mm/sec and a 400mm stroke

is that 500 mms sec unloaded ?

how many kw are the motors ?

ask to see a video of a sim tested full speed from low to high

500mm sec is at rated power 750watt with a force of arround 135kgf

Hi all, thanks a lot for all your answers !
I'll check these references
Quick question: I understood that the speed of an actuator ccould depend on both the engine power and the diameter of the screw? I seem to have already read that, for example, much higher speeds could be achieved with leadscrew 2510 or 2025. Am I correct?
Forgive my questions i am a real newbie noob on the subject xD

The speed is calculated in rounds second times screwpitxh so a 3000 rpm motor gives 50 rp second with a 10mm pitch from screw gives 500 mm/sec and a 25mm pitch 1125mm sec.