SimTools v2 - Game Dash v2.3

Hi. Maybe ayone could help me with this? I follow all procedure to install Gamedash, but appear these screens. What must I do? In Game Manager, Dash ouput setings is enabled.
All the best.

Game Dash for Simtools v2.0 has not been released yet

Sorry for my very little preparation in this matter but... I can ask in which situation Game Dash can be used?
It is a SimTools and SimTools - Remote Profiler accessory?
Which we can make with this SimTools add-on and it has a manual which is available on its proper use?

Hi all!, First of all thanks for your work guys, Game Dash seem to be the software that am looking for a long time, I startetd to made a Dash based on TM1638 display and now I want finish and share with community.

Juan.

hi, apology's for my rubbish spelling, I'm new to this forum and have purchased the pro version of the sim tools software to use game dash.... but..... I've followed the guide of the BMW e36 dash with shift lights..... anyway I load up live for speed and the windows error sound goes off over and over again and it make the dash work well only the rev counter but not 100% or to scale, help you can

More info on what output it needs, be easy to create something to make it work , beauty of gamedash , can be very flexible or i could easily code a sister app to recieve Gamedash data and rework it to make dial work, just need to know what it needs or a unit on loan to play with, work it out , make app and send back, prefer an Aussie unit. , We can just about do anything thats can be dreamt.

Hello Guys for Start really thank you at yo buddy and his team for the work acomplished ( sorry for my best english)

I need to used Gamedash for Fan simulations i have take this dimmer motor http://www.ebay.fr/itm/2CH-AC-LED-L...060338?hash=item1c83c8d132:g:jmUAAOSw~FJZGXXD

and all the game dash setting is ok but my fan won't Start i show you the code and the picture to my configuration i hope you see the error

again really great works for simtools all applications is really the best

Code:

/*
*
*
Using AC Phase Control Circuit.
http://www.ebay.fr/itm/2CH-AC-LED-Light-Dimmer-Module-Controller-Board-ARDUINO-RASPBERRY-Smart-Home-/122470060338?hash=item1c83c8d132:g:jmUAAOSw~FJZGXXD



This is my code to fan simulations

*
*
*/

//***************************** DECLARATIONS // PIN ******************************
#include <TimerOne.h>
unsigned char channel_1 = 7;    // PIN 7 sur CH1
unsigned char channel_2 = 6;    // PIN 6 sur CH2
unsigned char CH1, CH2;
unsigned char i=0;
unsigned int delay_time=2500; // delay ms or SPEED
unsigned char clock_tick; // variable for Timer1
int Speed = 0;
int SpeedGameDash = 0;
int bufferArray[4];
int oldSpeed = 0;

int speedmax = 400; // A partir de cette vitesse les Ventillos seront à fond



//************************ SETUP (1 fois au demarrage) *************************
void setup() {
  // put your setup code here, to run once:
  pinMode(channel_1, OUTPUT);// PIN 7 sur CH1
  pinMode(channel_2, OUTPUT);// PIN 6 sur CH2
  attachInterrupt(1, zero_crosss_int, RISING);//PIN 3 sur SYNC
  Timer1.initialize(100); // set a timer of length 100 for 50Hz or 83 for 60Hz
  Timer1.attachInterrupt( timerIsr );
  Serial.begin(9600);
}


//************************* LOOP DE CONTROLE DE DIMMING************************
void timerIsr()
{
clock_tick++;

if (CH1==clock_tick)
{
digitalWrite(channel_1, HIGH); // triac firing
delayMicroseconds(10); // triac On propogation delay (for 60Hz use 8.33)
digitalWrite(channel_1, LOW); // triac Off
}

if (CH2==clock_tick)
{
digitalWrite(channel_2, HIGH); // triac firing
delayMicroseconds(10); // triac On propogation delay (for 60Hz use 8.33)
digitalWrite(channel_2, LOW); // triac Off
}
}


//****************** FONTION "ZERO_CROSS" PILOTEE PAR LA PIN 3 *****************
void zero_crosss_int(){  // function to be fired at the zero crossing to dim the light
clock_tick=0;
}



void loop() {
  ReadData();
  CalcDimming();
}


//********************* LECTURE DES COMMANDE DE SIMTOOLS ***********************
void ReadData(){
  while(Serial.available()){
  if (Serial.available() == 4)  {    //if 4 bits available in the Serial buffer...
     
        int i;
        for (i=0; i<4; i=i+1) {       // read and label each byte.
         bufferArray[i] = Serial.read();
         }
     
         if (bufferArray[0]  == 'S'){
           SpeedGameDash = ((bufferArray[1]-48)*100) + ((bufferArray[2]-48)*10) + // Take values 1-3.
                               ((bufferArray[3]-48)*1);
       }
       if (bufferArray[0]  == 'E'){
           SpeedGameDash = 0;
       }
  }
}
}

//****************************** FONCTION DIMMING ******************************
void CalcDimming() {
  if (SpeedGameDash > speedmax){
    SpeedGameDash = speedmax;
  }
  if (oldSpeed != Speed){
    int oldSpeed = Speed;
    Speed = map(SpeedGameDash, 0 ,speedmax, 0 , 100);
    CH1=Speed;
    CH2=Speed;
  }
}

Great improves on 2.1 ! Awesome thanks ! ( still waiting for sim vibe support )

Im not into this technical stuff but thanks yobuddy for the work and time you put into!! Leroy

Thanks for the great addition, I am currently trying to implement fans and struggling pretty bad. I have my arduino program setup to receive serial commands in the form of S followed by a three numbers to represent the speed. for instance at S100 would turn the fans on full speed and S000 would turn them off. I can confirm this works great by opening up the arduino serial monitor and manually typing in different commands. however I cannot for the life of me get game dash to send the commands to the arduino. I have iracing working to the point that I can see values being updated in game dash but again no output to the arduino.

I am running windows 10 with an arduino uno on com 12. the arduino is setup for a baud rate of 9600.

speed dash is using output S<Dash1> on interface 1

Math is setup as

MATH * 1
ROUND 0
PAD 3 0


I have purchased a pro license which i understand is required to get dash working, but it seems like i am missing something simple.





any help is greatly appreciated

EDIT

I created a 2 virtual ports and linked them and I can see data output from the game engine when I do axis testing. however I get no output from game dash when applying the same method. It seems like I need to somehow turn on game dash output and I don't know how.

I have also tried the virtual output within game dash and I get nothing.

I got it working, everything was correct, I just uninstalled/reinstalled game engine, game manager and dash. everything is working now.