OPEN VR CODER NEEDED !! PLEASE HELP !!

Trying some stuff on the actual code to see if I can add some deadzone without breaking everything...
No promises.


Edit on a somewhat different issue:
I was able to somewhat fix/workaround the black border of the Oculus rift.
There is 1 downside to it is that there is not cancellation for rotation (yaw)

Added a test file, not really tested, just for fun. seriously, don't expect anything, didn't have time to test correctly and I was with the rift atm.)
I recommend that you disable the velocity stuff (motion compensation options) as I didn't touch theses and could break the results.
Doesn't include the Oculus workaround.

Edit2: updated the file, *should work better*

Awesome dude I will give it a try later hopefully , really hope it works !!!

I'll still work most of the day on this to try to understand and to be sure of what I changes.
I updated the previous file btw.

I just tried it replaced the dll here "\Steam\steamapps\common\SteamVR\drivers\00vrinputemulator\bin\win64"

Its exactly the same as it was before I can't see any difference to be honest

Ill push the values higher.
For the moment set disable at the Vel/ACC in the motion compensation options.

Still trying to figure something out, it's full of weird maths everywhere

I think I got the finger on something now.

Ok ill try now, I did turn all the settings off last time.

Ok you've done something, its still as bad with the vibrations but the smoothness has gone its like the games is running at 15fps , when I turn my head its moving in little steps

Yeah I set an over big deadzone to be sure you saw it.
Strange thing that you still feel the vibrations...
Could be rotation vibration as I didnt deadzone it.

Ok it should stutter a lot less as I have lowered the deadzone value.
I also disable some stuff to see if it affect your vibrations.
Also do you get the vibrations when are or not moving or it is always when the rig is in movement?

I bet you didn't have this problem with the Rift before?

The main vibrations atr from the base shakers from the engine. Also some vibration from the rig moving sharply with motion. They would be short sharp high spikes in values I would think.

The rift didnt seem to be bothered too much with vibration when I attached it in the right place. These WMR controllers though are long and not as well made as the Rift controllers .

I may get chance to try again later but if not it will be early next week.

Thanks for working on it though dude, appreciate it

Np,
It is always better to fix this sort of issue at the source. So either the WMR controller are not that great or you really have to isolate them.

Adding dead-zones bring up a tons of issue + making the overall cancellation less precise.

@Wagnard Woahhh dude your deffo onto something the last one you posted has calmed it all down loads !! When I'm driving the track/scenery is all smooth the only thing that has a bit of jitter is the car. Its hard to explain but its a 1000 times better than it was

Well, I'm glad it it is usable for you now!
The only thing preventing me to buy a WMR (hp reverb) are the shitty controller. It appear their tracking is not really good. I'm looking around to see if it is possible to use a vive tracker for compensation instead (I have a vive so I already have the base stations.)

Yeah I'm not sure about mixing the vibe tracker with WMR, I cant see why it wouldn't work though .

Is there any chance you could lower the value again for whatever you did in the last file there must be a sweet spot I think where it stops the jitter

I'll try to make for you later(today or tomorro) different versions with different values so you will just have to pick the one that is best for you.

Awesome Thanks matey

Ok, here it is.
6 flavors
lowest numbers means the lowest deadzone, it also means the lowest stutter (because of the deadzone)
0.001
0.002
0.003
0.004
0.005
and 0.010 ( I think this was the one you were at but not sure, dont remember what I gave you earlier.)

Test theses and tell me if you need a different value.
I can also add more precision, ex: if you feel between 0.003 and 0.004 is the right spot, I can make a 0.0035

Hiya @Wagnard I've tried all the above and they are all shaking like crazy but the last one you posted the other day still works and is great apart from the car judder. I tried the 0.010 and its not the same as the last one the screen still going crazy.

No idea what you did to that one but something is right with it lol