FlyPT Mover

No problem man, I don't have any issues with simtools, just wanted to try your thing. I already have motion compensation with a vive tracker. So I'm all good and can continue to use simtools no problem.
Take care !

HI . I have received my new G2 and I try to set up Motion Rig with FLYPT motion , I can't see three-colored cross Need help for this !!!! Thanks

Hi Flyman
Do you know this video?
This may help a littl.
And do you know the discord-channel for OVRMV ?
I got it working so far by following the step by step description on the OVRMC website.
Hope this helps a little...
Wickie

Hi @pmvcda I can not find a source of War Thunder. Or it isn't done yet?

I mean for aircrafts.

Can SCN be used on FlyPT?

@Mu-KwangKim

since game engine supports SCN actuators can that somehow be used with MOVER?

Thanks !
Missing something again with FLyPT Mover And I can see the color axe !! But work with controler !
I try to have some news from discord !!

Hi

has anyone tested Mover 3.3.5 with AeroFly FS2?

I´ve some problems with the movement (stuttering)
see here: https://www.xsimulator.net/community/threads/3dof-c1500´s-first-sim-seat.12718/page-6#post-210795

Hopefully someone has an idea

Kind regards
Peer

Hi all!
I want to add some more turbulence to heave, when flying in windy conditions (MSFS20). I tried a lot in mover (noise source, poses, directs,....), but nothing went or was satisfying. Apart from the noise function, I got weired behavior or interrupts in serial communication. Do you have any working solution to add heave? Thanks and merry christmas
Wickie

Try this filter : Add or Gain or Multi ..merry christmas !!

Thanks Flymen! I dove deeper in your proposed settings and tried them all, but finally they all do only increase the whole heave. As a result, my sim goes up snd down too much/ fast also with the joystick up/down commands. Thats not what I wanted.
What I tried was to add noise to heave. With huge values. With help of two Emalp filters I make them smooth. In this way I can get random +/- 50mm heave superpositioned. This gives such a good immersion of beeing really in the air!!! But this can not be the final solution, because the amount of aditional heave is allways the same, regardless of whether it is windy or not or you are on the ground or in the air.
The perfect solution would be to grab the vertical acceleration in a seperate module, filter and multiply it somehow and the mix it to heave.
Maybe @pmvcda has an Idea?
Wickie

Merry christmas and a happy new year to come chaps.

Well im here nagging about the panel shake again. Well hacking it myself. So im just curious if i cant use the Stall (dont really need it for my jets) in the hooks to get telemetry for Panel shake. I see there's modules that does have shake but nothing in the mainpanel_init so i dont know what to do with those.

I can get the arguments from mainpanel_init.lua (UH1)

Code:

Panel_Shake_Z                  = CreateGauge()
Panel_Shake_Z.arg_number    = 264
Panel_Shake_Z.input            = {-1,1}
Panel_Shake_Z.output        = {-0.8,0.8}
Panel_Shake_Z.controller    = controllers.Panel_Shake_Z

Panel_Shake_Y                  = CreateGauge()
Panel_Shake_Y.arg_number    = 265
Panel_Shake_Y.input            = {-1,1}
Panel_Shake_Y.output        = {-0.8,0.8}
Panel_Shake_Y.controller    = controllers.Panel_Shake_Y

Panel_Rot_X                  = CreateGauge()
Panel_Rot_X.arg_number        = 282
Panel_Rot_X.input            = {-1,1}
Panel_Rot_X.output            = {-0.5,0.5}
Panel_Rot_X.controller        = controllers.Panel_Rot_X

If i look at simshakers.lua it goes something like this

Code:

local PanelShake =
              string.format(
              "%.2f~%.2f~%.2f",
              MainPanel:get_argument_value(264),
              MainPanel:get_argument_value(265),
              MainPanel:get_argument_value(282)

dataTable.panelShake = PanelShake

So the question then i suppose. Can i replace stall and use that or somehow get this to actually output in the normal xyz telemetry. It would be good to get some sort of intensity (if thats possible) but id settle for on/off

From Dcs to flypt

Code:

    local stall = 0
    for k,v in pairs(alarm) do
        if k == "StallSignalization" then
            if v == true then
                stall = 1
            end
        end
    end


stall,                                         -- 22 = Stall alarm (0 or 1)

@wannabeaflyer2 , I did that but not work ...

Hi @Flymen not sure if this was actually for my attention, but i seem to recall That the Fix that FlyPt suggested worked for me regarding No Limits if this is the issue for you been a while but my mistake initially was trying to use demo mode ,Which did not export data , i needed a paid version and all went well after follwing Mover setup notes

Ok finaly work with : --telemetry --telemetryport=15151
But the connection * Connect* must be set manually without the hook at the right time at the start game, only the hook does not work automatically !!!
Thanks

Hello! Hope things are going better

I've been tuning my G seat for DCS lately and ive noticed that the Longitudal acc stays the same (some slight gains or dips depending) and does not care about actual airspeed or G load. I would say this is a DCS telemetry issue but worth being aware of. Essentially this means that i cant tune the seat to give me proper acceleration cues.

When you see the long acc move up and down considerably its me going from full idle to burner.

Hard to see the values. Are you choosing “accel. with gravity” in mover ? This should give you right data.

Both are in the video (2 bottom ones) and more or less identical. Full burner when loosing airspeed is still full burner acceleration data. They operate independent from each other. Preferably DCS would fix that. It would not be an easy workaround on Mover's end

I'd say its comparably to another discussion we had a while back on knife edge and pulling G's. While the sway /roll data is still there you would not feel it as the centrifugal force is pushing you hard into the seat. Suppose we still need to wait for 4.0 so we could tie these in. Doubtful DCS will do anything about it even though i would say there's no way you should have full acc data when you are loosing tons of energy. That said you would probably feel some difference but for operating the motion rig you need to limit it depending on the other forces